来源：http://www.jndclyyxgs.com 发布时间：2019-06-13 20:17:41
Since the end of 1970s, aluminium alloy doors and windows, curtain wall industry began to take off in China. The popularization and application of aluminium alloy glass curtain wall in construction and development began from scratch, from imitation to self-research and development, from Bell's small-scale to large-scale construction projects to contract construction projects, from the production of low-grade products to the production of high-tech products, from the construction of low-rise building doors and windows to build high-rise glass. Curtain wall, from only dealing with such a simple summary of high-end profile extrusion complex cross-section, import development contracted projects, aluminum alloy doors and windows, glass curtain wall has developed rapidly.
Aluminum coil manufacturer
By the 1990s, the emergence of new building materials promoted the further development of building curtain wall. A new type of building curtain wall appeared all over the country, that is, metal curtain wall and metal curtain wall refer to building curtain wall with metal panels. Curtain wall panels simply speaking, glass of glass curtain wall replaces metal curtain wall form, but because of the great difference in surface materials and because of great differences, considering that The design and construction should be carried out separately. Due to the excellent processing performance of metal sheets, color types and good security, fully adapted to complex modeling design, can increase concave and convex lines, and deal with various types of curves, architects have great space to play, destination architects, so as to achieve rapid development.
Aluminum coil manufacturer
Polishing trough usually has two purposes: surface polishing and fine dust removal of aluminium alloy polished by sand surface.
(1) Flat polishing: Flat polishing tank can produce a certain thickness of oxide film, and can greatly improve the brightness of aluminum. Because the aluminium alloy loses luster after trigonometric polishing by anodic oxidation, surface polishing is carried out first, and a dense oxide layer is formed on the surface to fix the luster, then anodic oxidation is carried out, which greatly reduces the loss of luster. In addition, Shenyang aluminium anodic oxide sand surface polishing, multi-channel washing, and may be retained in the air or water tank, pitting, if the first plane polishing tank, prefabricated some chemical oxide film thickness first protection, to avoid rusting the water tank or color materials before oxidation, improve production.
(2) Fine ash removal: acid corrosion ash is very stubborn, generally difficult to remove. It will seriously affect the appearance quality of acid-etched materials. Although most of the acid-etched ash can be removed from the sand polishing tank, there may still be a small amount of residual under some special conditions. Flat polishing tank can completely remove acid-etched ash, thus ensuring the quality of aluminium alloy, and completely eliminate the pollution of acid-etched ash on the coloring tank and electrophoresis tank.