当前位置:首页-新闻资讯

花纹铝板的选择要注意查看哪些内容?

来源:http://www.jndclyyxgs.com/ 发布时间:2017-12-13

花纹铝板的运用非常广泛,三条筋、五条筋、指针型花纹铝板都是常见的品种,在建筑、交通、装修、制冷设备等范畴都能看到花纹铝板的身影。今天 ,材信铝卷生产厂家给大家简单说一说选择花纹铝板的诀窍。
The use of decorative aluminum plates is very extensive. Three bars, five bars and pointer pattern aluminum plates are common varieties. In the field of building, transportation, decoration, refrigeration equipment and so on, we can see the figure of aluminum pattern. Today, the manufacturer of material letter aluminum rolls simply said the knack of choosing the pattern aluminum plate.
看加工。正规大厂出产的花纹铝板,用料讲究,板面亮光亮堂,花纹清楚规整,铝板平整,表面无油污、划伤、折伤等缺陷;而小厂出产的花纹铝板,用废铝做材料,表面暗淡无光,花纹不清楚、不规整,板面不平整,功用不合格,质量差。
Look at the processing. Formal large production pattern aluminum, exquisite material, surface light bright, clear regular pattern, flat plate, no oil, surface scratches, broken and other defects; and the small factory production pattern aluminum, with aluminum as the material, the surface pattern is not clear, dim and dark, irregular, the surface is not smooth, the function of substandard quality. Poor.

铝卷生产厂家
看厚度。优质花纹铝板所选的板材,其厚度、强度、氧化膜厚度等都应该符合国家标准:铝板厚度≥1.2mm,抗拉强度≥157牛/平方毫米,屈服强度≥108牛/平方毫米,氧化膜厚度≥10微米。如果达不到标准,就是劣质花纹铝板。
Look at the thickness. The selected pattern aluminum plate quality, thickness and strength, the thickness of the oxide film should comply with the national standard: aluminum plate with thickness not less than 1.2mm, the tensile strength of more than 157 cattle / mm2, yield strength more than 108 cattle / mm2, film thickness of 10 microns. If it does not reach the standard, it is a bad pattern of aluminum.
看效能。从厂家的生产线到企业的车间,中心要经历打包、装车、运送 、贮存、开包许多环节,花纹铝板不免出现氧化、划伤之类的残损,规划大、效能好的供货商会为用户供应退、换效能,为用户处理后顾之虑。
Look at the efficiency. The workshop to the enterprise from the factory production line, the center will experience packing, loading, transporting, storing, unpacking many links, unavoidable scratch pattern aluminum oxidation, such as damage, planning, performance good suppliers to provide the user back, for the performance, for the user to worry.
看价格。花纹铝板分为纯铝与合金两种,其价格天然也不一样。正规厂家出产的花纹铝板加工费一吨在几千元,合金价格要高于纯铝,正规厂家的铝板价格比起劣质铝板要高20%-30%左右。企业在收购时,切忌不行单比价格,买到不合格产品,则悔之晚矣。
Look at the price. The decorative aluminum plate is divided into two kinds of pure aluminum and alloy, and their price is not the same. The production of pattern aluminum plates produced by regular factories costs a ton of thousands of yuan, and the price of alloy is higher than that of pure aluminum. The price of aluminum plates of regular manufacturers is about 20%-30% higher than that of inferior aluminum plates. Enterprises in the acquisition, not only avoid the price, buy substandard products, it is too late.
铝棒生产厂家销售的的纯铝板、合金铝板、花纹铝板、拉丝铝板、铝片、铝带、幕墙铝材品种齐全、价格合理,如果您需要了解更多关于材信铝板价格的内容。
Aluminum rod manufacturers sell pure aluminum, aluminum alloy, decorative aluminum, aluminum wire, aluminum, aluminum and curtain wall aluminum products, and the price is reasonable. If you need to know more about the price of the aluminum letter,