当前位置:首页-新闻资讯

铝板在使用中需要注意问题

来源:http://www.jndclyyxgs.com/ 发布时间:2023-03-17

铝板是优质的建筑材料,本身是比较环保的材料。那么山东铝板的优越性和特点是什么?铝板广泛应用于工程装饰家庭装饰通信电子交通设施保温防腐精装汽车制造等。
Aluminum plate is a high-quality construction material and is itself a relatively environmentally friendly material. What are the advantages and characteristics of Shandong aluminum plate? Aluminum plate is widely used in engineering decoration, home decoration, communication, electronic transportation facilities, thermal insulation, anti-corrosion, hardbound automobile manufacturing, etc.
山东铝板
Shandong aluminum plate
铝板保管:应存放在干燥通风的地方,并平放在表面,以免踩踏或碰撞。
Storage of aluminum plate: It should be stored in a dry and ventilated place and placed flat on the surface to avoid stepping or collision.
铝携带板:板的周围必须同时抬起,才能防止划痕板的表面。

铝卷生产厂家
Aluminum carrying plate: The periphery of the plate must be lifted simultaneously to prevent scratching the surface of the plate.
铝板缺口:用插线机或锣机切槽时,应使用半圆头铣刀。铝板的损伤不太深不太浅不折叠,0.2-0.3毫米厚的塑料芯应与铝板一起弯曲,提高强度和韧性。否则,铝板弯曲时可能会断裂或漆膜破裂。
Aluminum plate notch: When using a wire insertion machine or a gong machine to cut grooves, a semicircular head milling cutter should be used. The damage to the aluminum plate is not too deep or too shallow, and the plastic core with a thickness of 0.2-0.3mm should be bent together with the aluminum plate to improve strength and toughness. Otherwise, the aluminum plate may break or the paint film may break when bent.
铝板弯曲:弯曲边缘时应力均匀,形成一次,不要反复弯曲。否则铝板可能会断裂。
Bending of aluminum plate: When bending the edges, the stress should be uniform, forming one time, without repeated bending. Otherwise, the aluminum plate may break.
铝电弧加工:要使用特殊弯曲设备来加工电弧。这样,木板就会到达所需的表面,不能一次性弯曲。(大卫亚设,北上广深)。
Aluminum arc machining: Special bending equipment shall be used to process the arc. This way, the board will reach the desired surface and cannot be bent at once. (David Asher, North, Upper, Guangshen).
铝板放置:同一类型的其他放置的铝板可能会有色差。销售和使用不同批次的纸张时,要增加色差比较程序。我公司主要经营合金铝板铝纹板等。只有在没有视觉色差的情况下,才能在同一个平面上使用。
Aluminum plate placement: Other aluminum plates of the same type may have color differences. When selling and using different batches of paper, add a color difference comparison program. Our company mainly engages in alloy aluminum plate, aluminum grain plate, etc. Only when there is no visual color difference can it be used on the same plane.
铝板安装方向:铜色铝板安装在同一平面上时,流动方向应一致。否则,会出现视觉色差。

8铝撕裂膜:安装铝板后45天内拆下保护膜。否则很难撕开,或者粘合剂会转移。
Installation direction of aluminum plate: When copper colored aluminum plate is installed on the same plane, the flow direction should be consistent. Otherwise, visual color differences may occur

8 Aluminum tear film: Remove the protective film within 45 days after installing the aluminum plate. Otherwise, it may be difficult to tear or the adhesive may transfer.
铝使用条件:室内墙板应在室内使用,不得设置在室外。确保使用效果和寿命。
Aluminum usage conditions: Indoor wall panels should be used indoors, not outdoors. Ensure effective use and longevity.
有了铝卷生产厂家上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站:http://www.jndclyyxgs.com或者来电咨询,我们会尽全力为您解决
With the summary above from the aluminum coil manufacturer, I hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.jndclyyxgs.com Or call for consultation, and we will do our best to solve it for you