来源：http://www.jndclyyxgs.com 发布时间：2017-11-06 10:16:25
Insulation aluminum coil manufacturers will pay attention to the equipment in the distance compression process, not because the spacing is too small causing cracking phenomenon of pressing process, and we should pay attention to the above cleaning equipment, waste oil, dust and metal particles, pressure to ensure machining after insulation surface finish of the aluminum coil, prevent scratches on the surface.
Insulation aluminum coil by pressure type technology to produce various patterns, thermal insulation aluminum coil manufacturers use pressure equipment be pressed into various types of pressure type aluminum or corrugated aluminum, aluminum coil can be divided into light pressure type and color coated aluminum roll type, products are widely used in insulation equipment, roof and metope. Some people ask, if the aluminum coil directly press type, will not crack it?
In fact, the insulation aluminum coil manufacturers will use the softening treatment of H24 state to ensure that the pressure type is not cracking. The shape of the insulated aluminum coil is similar to the bending, and it can be used in the roof of the building, and also become the roof insulation aluminum plate after the strength increased after pressing.
In this paper, the aluminum coil manufacturers to provide you with our website is: http://www.jndcly.com/, we will wholeheartedly provide you with better service, you are welcome to visit!