今天，铝板生产厂家和大家聊一下用铝板做模具有哪些优越性，模具铝板与模具钢相比，具有显著的优越性，具体表现在：
Today, the aluminum plate manufacturer will talk with you about the advantages of using aluminum plates to make molds. Compared with mold steel, aluminum plates for molds have significant advantages, as shown in the following:
1.铝合金板重量轻。由于其密度只有一般模具钢的36%，故运动惯性比较低，在生产过程中加，减速度均比较容易，能减低机器及模具的损耗。
1. Aluminum alloy plate is light in weight. As its density is only 36% of that of ordinary die steel, it has low inertia. It is easy to accelerate and decelerate during production, which can reduce the loss of machines and dies.
2.铝合金板机械加工容易及尺寸稳定性高。
2. Aluminum alloy plate is easy to machine and has high dimensional stability.

其切削速度比一般模具钢快6倍以上，故大量减低模具加工时间，令模具可更快进行生产。
Its cutting speed is more than 6 times faster than ordinary die steel, so the die processing time is greatly reduced, so that the die can be produced faster.
3.铝合金板有很好的热传导率。
3. Aluminum alloy plate has good heat conductivity.
其热传导率比一般模具钢高，故可节省模具在生产时的冷切时间50%，从而提高模具的生产效率。所以在注塑模、吹塑模、低压模、橡胶模等不同模具行业80%的产品中有广泛应用。
Its heat conductivity is higher than ordinary die steel, so it can save 50% of the cold cutting time of the die during production, thus improving the production efficiency of the die. Therefore, it is widely used in 80% of products in different mold industries, such as injection mold, blow mold, low pressure mold, rubber mold, etc.
随着市场的发展，目前在欧美市场超硬铝已替代钢做模具，所以您有什么需求就来我们网站http://www.jndclyyxgs.com咨询吧！
With the development of the market, super hard aluminum has replaced steel as the mold in the European and American markets, so come to our website if you have any needs http://www.jndclyyxgs.com Consult!