当前位置:首页-新闻资讯

防腐保温铝卷的特性及表面白点处理

来源:http://www.jndclyyxgs.com/ 发布时间:2022-05-28

防腐保温铝卷是铝卷表面涂层着色后得到的产品,其性能稳定,不易被侵蚀。通过特殊解决方案,面层可保质几十年,广泛应用于各行各业。那么防腐保温铝卷的特性及表面白点处理是怎样呢?
Anti corrosion and thermal insulation aluminum coil is a product obtained after coloring the surface of aluminum coil. Its performance is stable and not easy to be eroded. Through special solutions, the surface layer can be guaranteed for decades and is widely used in all walks of life. What are the characteristics and surface white spot treatment of anti-corrosion and thermal insulation aluminum coil?
防腐保温铝卷的特性
Characteristics of anticorrosive and thermal insulation aluminum coil
漆成木质质感,具有细腻的物理层次感和清新的艺术美感。图案设计可随心所欲,给客户一个普遍而独特的选择,可以丰富商品的历史和人文意义,给大家一个美好的享受。
Painted into wood texture, it has a delicate physical sense and a fresh artistic beauty. Pattern design can be arbitrary, giving customers a universal and unique choice, enriching the historical and cultural significance of commodities, and giving everyone a beautiful enjoyment.
采用优质铝材、塑料和粘合剂,采用的加工工艺,具有装饰面板所需的抗拉强度,气压、环境温度、环境湿度等因素的变化不会造成防腐保温铝卷弯曲,变形或膨胀。
It adopts high-quality aluminum, plastic and adhesive, and adopts professional processing technology. It has the tensile strength required for decorative panels. Changes in air pressure, ambient temperature, environmental humidity and other factors will not cause bending, deformation or expansion of anti-corrosion and thermal insulation aluminum roll.
表层无复合连续高温压印和残余应力,切割后不会变形。
The surface layer has no composite continuous high-temperature stamping and residual stress, and will not deform after cutting.
耐盐酸酸雨侵蚀,不易侵蚀活菌,不释放有害气体,不易对主要龙骨及固定构件造成侵蚀。
It is resistant to salt, acid and rain erosion, is not easy to erode living bacteria, does not release harmful gas, and is not easy to erode the main keel and fixed components.
经连续高温烘烤后,漆纹仍保持较高的平滑度,色彩稳定性好,色偏小。如果使用聚酯漆,可以保证10年,氟碳喷涂可以保证20年以上。
After continuous high-temperature baking, the paint lines still maintain high smoothness, good color stability and small color deviation. If polyester paint is used, it can be guaranteed for 10 years, and fluorocarbon spraying can be guaranteed for more than 20 years.

铝卷生产厂家
防腐保温铝卷表面白点处理
Anti corrosion and thermal insulation aluminum coil surface white spot treatment
防腐保温铝卷的金属活性强,容易被氧化。由于铝皮在氧化时会产生致密的氧化铝膜,可以防止与铝的连续反应。因此,铝皮上出现白点应该是正常现象。对于表面要求严格的铝皮,如何避免表面出现白点,使产品更光滑亮丽,不仅与加工工艺有关,还与后期的表面处理工艺密切相关。
The anti-corrosion insulation aluminum coil has strong metal activity and is easy to be oxidized. As the aluminum coating will produce a dense alumina film during oxidation, it can prevent continuous reaction with aluminum. Therefore, it should be normal for white spots to appear on the aluminum sheet. For aluminum sheet with strict surface requirements, how to avoid white spots on the surface and make the product more smooth and bright is not only related to the processing technology, but also closely related to the later surface treatment technology.
大型铝制品阳极氧化时,加工后表面偶尔会出现白点。隔热铝皮氧化后尤为明显。氧化后水洗不充分会导致干燥后表面出现白点。解决方法如下:氧化后加强清洗,尽量用水枪清洗,清洗后注意保护表面,尽量避免产品与其他产品接触,自然晾干。
When large aluminum products are anodized, white spots occasionally appear on the surface after processing. The thermal insulation aluminum coating is especially obvious after oxidation. Insufficient washing after oxidation will lead to white spots on the dried surface. The solutions are as follows: strengthen cleaning after oxidation, and try to clean with a water gun. After cleaning, pay attention to protecting the surface, try to avoid contact with other products, and dry naturally.
铝卷生产厂家认为要想控制铝皮表面的白点,不仅要在加工产品前注意产品的表面问题,还要注意表面处理过程中的预防,使用标准严格的加工流程和加工工艺,避免形成白点。可以用酸洗和碱洗来清洗白斑,但要控制浓度或喷漆,阻断铝与氧的接触。
Aluminum coil manufacturers believe that in order to control the white spots on the surface of aluminum sheet, they should not only pay attention to the surface problems of products before processing, but also pay attention to the prevention during surface treatment, and use strict standard processing processes and processes to avoid the formation of white spots. Acid and alkali washing can be used to clean the white spots, but the concentration or painting shall be controlled to block the contact between aluminum and oxygen.
我公司是的生产厂家,产品种类多样,规格尺寸齐全,质量有保证,价格合理,如果您有需要的话,可以来电订购,欢迎关注网站www.jndclyyxgs.com
Our company is a professional manufacturer with a variety of products, complete specifications and sizes, guaranteed quality and reasonable price. If you need it, you can call us to order. Welcome to the website www.jndclyyxgs Com.