当前位置:首页-新闻资讯

耐磨7075铝板的优势是什么你知道吗?

来源:http://www.jndclyyxgs.com/ 发布时间:2019-12-26

  耐磨弯头和耐磨7075铝板的优点不同于传统钢管、耐磨合金铸管、铸石管、钢塑管和钢橡胶管。耐磨7075铝板外层为无缝钢管,7075铝板化工厂:煤输送7075铝板。内层为刚玉。刚玉层硬度高达hv1100-1400,相当于碳化钨钴合金,耐磨性是碳素钢管的20多倍。耐磨7075铝板的耐磨性主要取决于其内层数毫米厚的刚玉层,这比耐磨合金铸钢管、铸石管的成分和组织都要多,并由厚度对耐磨性有了质的飞跃。
  The advantages of wear-resistant elbow and wear-resistant 7075 aluminum plate are different from those of traditional steel pipe, wear-resistant alloy cast pipe, cast stone pipe, steel plastic pipe and steel rubber pipe. The outer layer of wear-resistant 7075 aluminum plate is seamless steel pipe. 7075 aluminum plate chemical plant: Coal Transportation 7075 aluminum plate. The inner layer is corundum. The hardness of corundum layer is as high as hv1100-1400, which is equivalent to WC-Co alloy. The wear resistance of corundum layer is more than 20 times that of carbon steel pipe. The wear resistance of the wear-resistant 7075 aluminum plate mainly depends on the corundum layer with the thickness of several millimeters, which is more than the composition and structure of the wear-resistant alloy cast steel pipe and cast stone pipe, and the thickness has a qualitative leap to the wear resistance.
  耐磨7075铝板迅速占领市场,除了质量高、性能好外,还在于7075铝板的性能比其他耐磨耐腐蚀热管要高。相同规格、相同单位长度的7075铝合金耐磨板,其重量仅为耐磨合金铸管的一半左右,每米工程造价降低20%-30%;只需三分之一的铸石管重量,每米降低工程造价5%-10%;耐腐蚀或耐高温使用7075铝板,其价格仅为不锈钢管的一小部分。
  In addition to high quality and good performance, the performance of 7075 aluminum plate is higher than that of other wear-resistant and corrosion-resistant heat pipes. The weight of 7075 aluminum alloy wear-resistant plate with the same specification and unit length is only about half of the wear-resistant alloy cast pipe, and the project cost per meter is reduced by 20% - 30%; only one third of the cast stone pipe weight is needed, and the project cost per meter is reduced by 5% - 10%; the price of 7075 aluminum plate used for corrosion resistance or high temperature resistance is only a small part of stainless steel pipe.
  7075铝板生产工艺流程
  7075 aluminum plate production process
  1.原料即为带材盘管、线材、助熔剂。放入前应经过严格的理化检验。
  1. Raw materials are strip coil, wire rod and flux. Strict physical and chemical tests shall be carried out before placing.
  2.带钢头尾对接,单丝或双丝埋弧焊,轧成7075铝板后采用埋弧焊自动修复。

铝板生产厂家
  2. Butt joint of strip head and tail, single wire or double wire submerged arc welding, and automatic repair of submerged arc welding after rolling into 7075 aluminum plate.
  3.成形前,对带材进行平整、切割、刨平、清理、运输和弯曲处理。
  3. Before forming, the strip shall be leveled, cut, planed, cleaned, transported and bent.
  4. 电接触压力表用于控制输送机两侧油缸的压力,保证带钢的平稳输送。5.采用外控或内控辊成型。
  4. The electric contact pressure gauge is used to control the pressure of the oil cylinders on both sides of the conveyor to ensure the smooth transportation of the strip steel. \5. Adopt external control or internal control roll for forming.
  6. 采用焊缝间隙控制装置,确保焊缝间隙满足焊接要求。严格控制管径、错边数量和焊缝间隙。
  6. Adopt the weld gap control device to ensure that the weld gap meets the welding requirements. Strictly control the pipe diameter, the number of staggered edges and the gap between welds.
  7. 内外焊机均采用林肯焊机进行单线或双线埋弧焊接,以获得稳定的焊接规范。
  7. Lincoln welding machine is used for single line or double line submerged arc welding of internal and external welding machines to obtain stable welding specifications.
  8. 采用连续在线超声波自动伤口检测仪对完成的焊缝进行检测,保证了螺旋焊缝无损检测覆盖率。如有缺陷,将自动报警并喷印,生产人员可随时调整工艺参数,消除缺陷。
  8. The continuous on-line ultrasonic automatic wound detector is used to detect the completed weld to ensure the coverage rate of non-destructive testing of spiral weld is . If there is any defect, it will automatically alarm and spray print, and the production personnel can adjust the process parameters at any time to eliminate the defect.
  9.空气等离子切割机用于将7075块铝板切割成单件。
  9. Air plasma cutter is used to cut 7075 aluminum plates into single pieces.
  10. 后切割成一个单一的7075铝板,每批7075前三块铝板应经过严格的初始检测系统检查机械性能,化学成分和焊缝的融化状态,以及7075铝板的表面质量和无损检验,确保管道制作过程是合格的正式生产之前。
  10. After cutting into a single 7075 aluminum plate, the first three aluminum plates of each batch of 7075 shall be subject to strict initial inspection system to check the mechanical properties, chemical composition and melting state of welds, as well as the surface quality and non-destructive inspection of 7075 aluminum plate, so as to ensure that the pipeline manufacturing process is qualified before formal production.
  11. 焊缝处有连续声探伤标记的部位,应进行人工超声和x射线复检。如有缺陷,修复后应重新进行无损检测,直至确认缺陷已消除为止。
  11. Artificial ultrasonic and X-ray re inspection shall be carried out for the parts with continuous acoustic flaw detection marks at the weld. If there is any defect, NDT shall be carried out again after repair until it is confirmed that the defect has been eliminated.
  12.用x射线电视或胶片对带材对接焊缝与螺旋焊缝t接头交叉处的管进行检查。
  12. Use X-ray television or film to inspect the pipe at the intersection of butt weld of strip and T-joint of spiral weld.
  13.每个7075铝板都经过静液压测试,压力是径向密封的。试验压力和时间由7075铝板液压微机试验装置严格控制。测试参数自动打印。
  13. Each 7075 aluminum plate is hydrostatic tested, and the pressure is radial sealed. The test pressure and time are strictly controlled by 7075 aluminum plate hydraulic microcomputer test device. Test parameters are printed automatically.
  以上是铝板生产厂家为大家介绍的耐磨7075铝板的优,想要了解更多关于铝板的信息,欢迎访问网站:http://www.jndclyyxgs.comThese are the advantages of wear-resistant 7075 aluminum plate introduced by aluminum plate manufacturers. To learn more about aluminum plate, please visit http://www.jndclyxgs.com