当前位置:首页-新闻资讯

铝板电解槽生产的工作原理

来源:http://www.jndclyyxgs.com/ 发布时间:2018-02-16

通常情况下,一个系列内铝板电解槽都是串联的,每台电解槽的电流相等的,控制电解槽热收入的主要参数就是电压。
Usually, a series of aluminum plate electrolysis cells are connected in series, and the current of each cell is equal. The main parameter to control the heat gain of the electrolytic cell is voltage.
根据公式W=IVT可知,槽电压越高,热收入越多;槽电压偏低,热收入就偏低。在电流、分子比基本稳定的情况下,要想形成理想的炉帮,必须逐步降低槽电压,减少电解槽的热收入,促使铝板电解质的高分子物质在侧部结晶析出。因为电解槽的温度越高,电解质的过热度越大,而炉帮的形成是在温度接近电解质的初晶温度时,才会在侧壁析出形成结晶,逐步形成炉帮。
According to the formula W=IVT, the higher the voltage of the trough, the more heat income, the low voltage of the trough and the low heat income. If the current and molecular ratio are basically stable, if we want to form the ideal furnace, we must gradually reduce the slot voltage, reduce the heat consumption of the electrolytic cell, and promote the crystallization of the polymer material on the side. Because the higher the temperature of the electrolyzer is, the greater the superheat of the electrolyte is. The formation of the furnace is only at the initial temperature of the electrolyte approaching to the electrolyte, then it will precipitate on the side wall and form crystals, and gradually form the furnace side.

铝板生产厂家
如果炉帮过厚时,容易熔化伸腿,化瘫铝水平,而使电流效率降低,遇到这种情况时,应适当的抬高电压,增加热收入,融化过厚的炉帮,增加侧部散热,降低炉底温度,促使伸发育形成。
If the furnace is too thick, easy to melt your legs, and the level of paralysis of aluminum, the current efficiency decreased, encounter this kind of situation, raise the appropriate voltage, increasing the heat income, the thickness of the furnace for melting, increase heat dissipation, reduce the bottom temperature, the formation of extension.
饰面层应选用饰面砂浆、点缀灰浆等轻质功能性涂层或有杰出透气性的水性外墙涂料,这样让硅酸铝板保持了其轻质的特性,也增加了其美观度。铝板配件主要选用各类涂料,一方面增加硅酸铝板的表面的颜色,让其可以适用于任何环境还有涂料可以一定程度上其到阻燃以及保温的作用。
The decorative layer should be decorated with mortar, decorated with mortar and other lightweight functional coatings or excellent waterborne exterior wall coatings, so that the aluminum silicate board maintains its lightweight characteristics, and also increases its beauty. Aluminum plate accessories mainly use various coatings, on the one hand, increase the surface color of aluminum silicate board, so that it can be applied to any environment, and paint can to a certain extent its role in flame retardant and thermal insulation.
硅酸铝板主要用于电力工业、电力锅炉、汽轮机及核电隔热、船舶工业的防火隔热、建筑业、防火门的防火隔热、化工工业高温反应设备及加热设备的壁衬、汽车、火车制造业、防火、隔热、窑炉砌衬、炉门、顶盖密。
Silicate aluminum is mainly used for the electric power industry, electric power boiler, steam turbine and thermal power, shipbuilding, construction, fire insulation fire doors fire insulation, chemical industrial high temperature and heating equipment of the wall lining, car and train manufacturing, fire prevention, heat insulation, furnace lining, door, roof cover.
本文由铝板生产厂家http://www.jndclyyxgs.com小编编辑,更多相关资讯请登录网站咨询。
This article is compiled by http://www.jndclyyxgs.com, an aluminum manufacturer, and more information is requested to consult the website.